iPhone 12 EMF Blocking Wallet Case with 5G Radiation Protection

Description

Shield Your Body from the Full Spectrum of Cell Phone Radiation Emissions

Pocket, ear, lap, hand — wherever your iPhone 12 rests against your body, it is transmitting Radio Frequency (RF) radiation from cellular, WiFi, Bluetooth, and 5G connections, and Extremely Low Frequency (ELF) radiation from the battery and internal circuitry. The closer the device, the higher the dose.

The DefenderShield® iPhone 12 Case puts a tested barrier at that exact contact point. The front cover contains Ultra Armor+® Shielding Technology — a multi-layer metallic composite that blocks up to 99% of directional EMF radiation from 0 to 110 GHz. Every wireless protocol your phone uses is covered: all three 5G bands, 4G LTE, WiFi, Bluetooth, GPS, NFC, and RFID. Ultra Armor+® also blocks ELF from the battery — the frequency band that most competing phone cases leave unaddressed.

Position the front cover between you and the device, and the shielding does the rest. Think of it like a lead apron at the dentist: the shielding protects what’s directly behind it, while the rest of your phone stays fully connected. Your cellular signal, WiFi, and Bluetooth continue to work normally.

EMF shielding performance verified through FCC-accredited lab testing.

Two Styles, Equal Shielding

Magnetic Wallet Case

The everyday carry option. Scratch-resistant vegan leather, textured diamond-grain microfiber interior, and a detachable magnetic anti-shock nesting that pops off for slim carry or car-mount use. Three RFID-blocking card slots, a clip-on wrist strap, a foldable landscape stand, and a magnetic tab closure. Available for select iPhone 12 models. The iPhone 12 and iPhone 12 Pro share the same case.

SlimFlip Wallet Case

The pocket-first option. A slim scratch-resistant vegan leather wallet folio with one RFID-blocking card slot, a fixed integrated nesting, and the same Ultra Armor+® shielded front cover. Thinner and lighter than the wallet, built for front pockets and compact bags. Includes a foldable landscape stand and full camera access. Compatible with iPhone 12 and iPhone 12 Pro only — not available for iPhone 12 Mini or iPhone 12 Pro Max.

Features

🛡 Ultra Armor+® — The Upgraded Shielding Layer Most Cases Skip

Both styles carry Ultra Armor+® in the front cover, blocking up to 99% of directional EMF from 0 to 110 GHz. That includes RF from every wireless protocol and ELF from the battery. Most EMF phone cases address partial RF protection. Ultra Armor+® covers both, verified by an FCC-accredited lab.

📱 Wallet or SlimFlip Profile

Three RFID-blocking card slots holding up to 9 cards, a wristlet, and a detachable nesting for car mounting — or one RFID slot and a thinner folio that slides into a front pocket. The Ultra Armor+® layer is identical. The choice is purely about how you want to carry your phone and how many cards you need with you.

🔒 RFID Shielding

Whether you carry up to nine cards in the Magnetic Wallet or one to three cards in the SlimFlip, each slot shields against contactless skimming of chip-enabled credit cards, transit passes, and IDs. No separate RFID sleeve needed.

📡 Zero Impact on Signal or Battery

The shielding in the front cover should be placed between you and your device to block direct EMF contact. The iPhone 12’s antenna operates through the unshielded back and edges of the case. Signal strength and connectivity stays the same while reducing your direct exposure.

🔀 Detachable Nesting — Magnetic Wallet Case Only

Detach the magnetic nesting from the wallet cover for a slim anti-shock shell when EMF protection is not needed or when mounting on a magnetic car vent phone mount or stand. Snap it back in when you need cards, a wristlet, and the full shielded cover. The SlimFlip keeps it simpler with a one-piece fixed design — nothing to detach, nothing to reassemble.

🧪 Tested at an FCC-Accredited Lab

The shielding performance is a documented, published number from an independent FCC-accredited laboratory — available on DefenderShield’s Technology page.

How to Use

Getting Set Up — Magnetic Wallet Case

1. Identify your model. The Magnetic Wallet Case fits iPhone 12, iPhone 12 Pro (same case), and iPhone 12 Pro Max. Make sure to check your phone settings (settings → general → about) to confirm your phone matches the phone model you are purchasing. Each case is precision-fitted for camera, button, and port alignment.

2. Secure your phone in the nesting. Press your iPhone into the anti-shock flexible nesting with a metal-plated backing until it seats firmly. Then magnetize the back to the magnetic back cover of the wallet case. 

3. Insert your cards and clip the wrist strap. Load up to nine cards into the RFID-blocking slots, add cash or additional cards into the larger pocket behind the slots, and attach the wrist strap for clutch-style carrying.

Getting Set Up — SlimFlip

1. Confirm compatibility. The SlimFlip fits iPhone 12 and iPhone 12 Pro only. Make sure to check your phone settings (settings → general → about) to confirm your phone matches the phone model you are purchasing. 

2. Seat the phone in the integrated shell. No detachable parts — press the phone into the fixed nesting until it clicks.

3. Add your card(s). Slip your most essential cards (up to 3) into the single RFID-blocking slot.

For Maximum EMF Reduction — Both Styles

• Keep the front cover of the wallet case between your phone and your body. Pocket or lap: cover against your leg. Calls: cover closed between screen and face. The rule never changes — the shielded cover must sit between body and device.

• Pair with Air Tube Earbuds for complete call protection. The case shields your body during pocket carry and your head during calls, but the Air Tube Earbuds can keep your phone and any RF or ELF signal even further away from your head during calls with a hollow acoustic tube.

• Use the landscape stand to create distance. Both styles fold into a viewing stand. Setting the phone on a desk during streaming or video calls keeps it off your body entirely.

• Wallet Case: detach for car driving. Remove the nesting, place it on a DefenderShield Magnetic Car Phone Mount, and reattach the wallet when you arrive.

Care Instructions

• Clean the cover with a soft, barely damp cloth. Avoid harsh chemicals and solvents.

• To ensure your case stays in peak condition, please avoid bending the corner near the magnetic wallet case’s camera cutout. Because of the slim design in this area, keeping it flat will help maintain the case’s structural integrity over time.

• Dust with a dry lint-free cloth.

• Keep the magnetic closure clear of lint and pocket debris for a reliable seal.

• Do not overload or force thick items into the RFID card slots — stretching can affect the shielding material.

 

Specifications

EMF Protection Specifications — Both Styles

Specification

Detail

Shielding Effectiveness

Up to 99% of directional EMF radiation blocked

Frequency Range

0 to 110 GHz (full spectrum)

RF Protocols Blocked

WiFi (2.4 GHz & 5 GHz) · Bluetooth · Cellular (1G–5G) · GPS · NFC · RFID · 5G low-band, mid-band & high-band mmWave

ELF Shielding

Yes — Ultra Armor+® blocks ELF emissions from the battery and internal circuitry

Shielding Location

Front cover only — must be positioned between body and phone

Device Connectivity

Fully functional — cellular, WiFi, Bluetooth, GPS unaffected

Testing & Verification

FCC-accredited lab tested for EMF shielding performance

RFID Blocking

Magnetic Wallet: 3 slots · SlimFlip: 1 slot

Physical Specifications — Magnetic Wallet Case

Case

Outer Dimensions (in)

Weight (oz)

iPhone 12 / 12 Pro

6.15 × 3.50 × 0.90

5.7

iPhone 12 Mini

To be verified by manufacturer

To be verified by manufacturer

iPhone 12 Pro Max

6.70 × 3.70 × 1.00

6.6

Note: The iPhone 12 and iPhone 12 Pro are the same physical size and share one wallet case.

Physical Specifications — SlimFlip

Case

Outer Dimensions (in)

Weight (oz)

iPhone 12 / 12 Pro

6.10 × 3.30 × 0.70

2.8

Note: The SlimFlip is compatible with iPhone 12 and iPhone 12 Pro only. It does not fit iPhone 12 Mini or iPhone 12 Pro Max.

Specification

Magnetic Wallet Case

SlimFlip

Exterior Material

Vegan polyurethane leather (PU) — scratch- and stain-resistant with magnetic back cover

Vegan polyurethane leather (PU) — scratch- and stain-resistant with magnetic back cover

Interior Material

Textured diamond-grain microfiber lining (PU, PPU and Nylon blend)

Textured diamond-grain microfiber lining (PU, PPU and Nylon blend)

Inner Nesting

TPU (Thermoplastic Polyurethane) and PC (Polycarbonate) blend enhances smartphone protection by offering superior flexibility and durability, with a metal-plated backing TPU (Thermoplastic Polyurethane) and PC (Polycarbonate) blend enhances smartphone protection by offering superior flexibility and durability in a fixed integrated nesting

Card Slots

3 × RFID-blocking

1 × RFID-blocking

Closure

Magnetic tab closure

Magnetic tab closure

Stand

Foldable landscape stand

Foldable landscape stand

Wrist Strap

Clip-on — included

Not included

Camera Access

Full — precision cut-out

Full — precision cut-out

Compatible Models

iPhone 12 / 12 Pro · · iPhone 12 Pro Max

iPhone 12 / 12 Pro only

HSA / FSA Eligible

Yes — see if you qualify at checkout

Yes — see if you qualify at checkout

Warranty

1-year manufacturer warranty

1-year manufacturer warranty

 

Videos

Watch the full product demo — see both the Magnetic Wallet Case and SlimFlip in action and learn how Ultra Armor+® shielding positions between your body and your iPhone 12.