VolantexRC Trainstar 500mm Brushless RC Plane 2S/3S Power RTF – Green/Orange

VolantexRC Trainstar 500mm Brushless RC Plane – 2S/3S Power, RTF

Take your flying skills to the next level with the VolantexRC Trainstar 500mm Brushless RC Plane. Featuring brushless power, 4-channel control, and XPILOT stabilization, this RTF (Ready-to-Fly) plane is perfect for beginners and hobbyists alike. Available in Green and Orange, and compatible with both 2S and 3S battery setups.

Product Short Video

Your browser does not support video. Watch the product video.

Video by Mitch Cooper.

Product Review

Accessories

• 2S 7.4V Battery – 400mAh 25C LiPo (for smoother, stable flight)

• 3S 11.1V Battery – 400mAh 25C LiPo (for more power and agility)

• 2S/3S LiPo Balance Charger – B3 V2 (faster charging for both batteries)

• Mode 1 Transmitter – for right-hand throttle users (please add a note “Mode 1” when ordering)

• Replacement Propeller Set – 2pcs for Trainstar 500mm (original spare part, easy to install)

• VolantexRC Trainstar 500mm Front & Rear Wheels Set – for 2S/3S RC Airplane (original spare part, easy to replace)

❓ Trainstar RC Plane – Frequently Asked Questions

✅ Is the RadioMaster TX16S compatible with the Trainstar?

• Yes, the Trainstar uses the V761 protocol

• Supports 4-channel control with TX16S

🛠️ Does the Trainstar have service panels like the Warbirds?

• No, there are no service panels

• The motor can be unscrewed from the front

• The flight board is inside the fuselage and may require cutting into the wing for access

✈️ How well does it slow down? What about flat spins and high alpha?

• On 3S, it’s not a slow flyer, especially with landing gear

• Compared to the Corsair, it stalls more easily during high-G maneuvers

• Stabilized mode makes it much easier to control

• Removing the landing gear and flying on 2S may help with slower flight

• Manual mode on 3S offers great power and fun, but slow flying can be a challenge

🎮 Can you deactivate the gyro?

• Yes, it has 3 flight modes controlled by a switch on the transmitter

• One mode is manual/expert, which disables the gyro

• Switch is typically located on top of the controller

• Explained in the instruction video and labelled on the transmitter

Key Features

• 500mm wingspan brushless RC airplane

• Supports both 2S and 3S LiPo battery configurations

• XPILOT stabilization with Beginner / Intermediate / Expert modes

• One-key aerobatics for flips and rolls

• Durable and lightweight EPP foam fuselage (crash-resistant)

• Off-road landing wheels suitable for grass and pavement

• 2.4GHz radio control system with long-range signal

• Multiple battery configurations available (up to 40min flight on 2S)

Specifications

• Wingspan: 500mm (19.7 inches)

• Length: 398mm (15.6 inches)

• Channels: 4CH (Throttle, Elevator, Rudder, Aileron)

• Motor: Brushless motor system

• Battery options:

  • 2S 7.4V 400mAh LiPo (1 / 2 / 3 batteries)

  • 3S 11.1V 400mAh LiPo (1 / 2 batteries)

• Flight Time:

  • 2S up to 40 minutes (with 3 batteries)

  • 3S up to 20–25 minutes (with 2 batteries)

• Control Distance: Up to 200 meters

• Recommended Age: 14+

• Flight Modes: XPILOT 3-mode flight assist (Beginner / Intermediate / Expert)

• Takeoff Method: Hand launch or ground takeoff

What’s in the Box

• 1x VolantexRC Trainstar 500mm Brushless RC Plane (pre-assembled)

• 1x 2.4GHz Remote Controller (Mode 2)

• 1–3x LiPo Batteries (based on selection)

• 1x USB Battery Charger

• 1x Landing Gear Set (pre-installed)

• 1x Spare Propeller Set

• 1x User Manual (English)

Why Choose the Trainstar 500mm

• Ideal for beginners, intermediate flyers, and gift buyers

• Supports both long-endurance (2S) and high-performance (3S) flight

• Available in two vibrant colors: Green and Orange

• Fully assembled and ready to fly out of the box